Example 01
12 × 24 ftSingle-car driveway
A compact approach for one vehicle.
Estimated total$2,144
3.91 yd³ ordered · 288 sq ft
Hardscaping & masonry / Calculator
Concrete Driveway Cost Calculator
Estimate concrete driveway cost from length, width and thickness. Set concrete cost per yard, labor, waste, forms and site prep for a practical project budget.
Free to use / No signup needed
01 / Project inputs
Set the driveway scope.
Start with the paved area, then tune local material and labor rates. Add-ons stay optional.
Street to garage or parking area.
Use the average width for an irregular drive.
Four inches is a common residential starting point.
Use a local ready-mix price before delivery fees.
The example starts at 10% for small variations.
A planning rate for placement and finishing.
Optional project add-ons
Lumber, stakes, and edge setup.
$
Excavation, base work, or haul-off.
$
Mesh, fiber, or reinforcing steel.
$
02 / Estimated total
Planning estimateConcrete driveway project
$2,144
288 sq ft · 3.91 yd³ ordered
Concrete material$704
Labor$1,440
Forms and edging$0
Site preparation$0
Reinforcement$0
Order planning snapshot
Base volume
3.56 yd³
With allowance
3.91 yd³
Planning estimate only—not a contractor quote. Delivery, permits, tax, and unusual access conditions are not included.
The quick path
From measurements to a usable budget.
1
Measure
Length × width
2
Set depth
Concrete thickness
3
Price
Material + labor
4
Add scope
Prep and reinforcement
5
Review
Plan the order
See the math
Three driveway sizes, one clear starting point.
These examples use the default assumptions above: 4-inch thickness, 10% allowance, $180 per cubic yard, and $5 per square foot for labor.
Example 02
20 × 24 ftTwo-car driveway
Room for two side-by-side parking spaces.
Estimated total$3,573
6.52 yd³ ordered · 480 sq ft
Example 03
12 × 60 ftLong driveway
A longer single-lane drive from the street to a home.
Estimated total$5,360
9.78 yd³ ordered · 720 sq ft
Before you buy
Concrete driveway questions.
Use the estimate for planning, then confirm the design and order details locally.
How much does a concrete driveway cost?
There is no single price for every driveway. Area, thickness, local ready-mix prices, delivery, labor, site preparation, forms, and reinforcement all affect the total. Enter local rates above for a planning estimate, then confirm the scope and quote with a local contractor.
How thick should a concrete driveway be?
Four inches is a common starting point for residential driveways carrying passenger vehicles. Soil, climate, drainage, local requirements, and heavier vehicles can change the design. Confirm the thickness and reinforcement with local code guidance or a qualified contractor; this calculator does not design a slab.
How many yards of concrete do I need for a driveway?
Multiply length in feet by width in feet by thickness in inches, then divide by 324 to get the base cubic yards. Add a waste allowance for ordering. Measure each section separately if the driveway is irregular or has a wider apron.
Should I add extra concrete?
A modest allowance can cover small measurement differences, spillage, and uneven edges. The example starts with 10%, but the right amount depends on the layout and supplier. Check the order quantity and delivery increments before buying.
What affects concrete driveway cost?
The main factors are driveway area and depth, ready-mix price and delivery, labor, excavation and base preparation, drainage, access for trucks, forms, and reinforcement. Local soil, weather, permits, and finish choices may also change a contractor quote.
Keep planning